problem greylisting and IP address

Need help? Ask here.

Moderator: Moderators

Post Reply
wkuypers
Posts: 79
Joined: Mon Nov 28, 2005 4:34 am

problem greylisting and IP address

Post by wkuypers » Thu May 11, 2006 3:31 am

hello,

since the greylisting is testing not only the To and From, but also the IP address, I have problems getting mails through the greylisting. A big ISP as Skynet in Belgium uses 195.238.3.0-195.238.6.0 for there emails going out.
Everytime the mails get blocked. On top of that, if the mails is blocked in less than 30 secondes, the next retry is 1 or several hours later.
So my question is, we have the possibility to leave out the last octet, but can't we leave out the whole IP adresse; for me the greylisting was already very efficient without it.
thanks

Willem Kuypers

RollerNetSupport
Site Admin
Posts: 850
Joined: Wed Nov 17, 2004 10:05 pm
Location: Nevada
Contact:

Post by RollerNetSupport » Thu May 11, 2006 9:59 am

I can add an option to drop the last two octets; the system should be able to handle that without too much modification of the policy filter. I'll look in to it.
Technical Support support@rollernet.us
Roller Network LLC

wkuypers
Posts: 79
Joined: Mon Nov 28, 2005 4:34 am

Post by wkuypers » Thu May 11, 2006 4:31 pm

glendale2x wrote:I can add an option to drop the last two octets; the system should be able to handle that without too much modification of the policy filter. I'll look in to it.

Great !

RollerNetSupport
Site Admin
Posts: 850
Joined: Wed Nov 17, 2004 10:05 pm
Location: Nevada
Contact:

Post by RollerNetSupport » Fri May 12, 2006 8:52 pm

This feature has been added. The octet option in Greylisting has been changed to a selector that allows dropping the last two, last only, or none.
Technical Support support@rollernet.us
Roller Network LLC

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest