I am not sure exactly for how long, but I'm noticing the sending mail servers are starting to queue mail for my 3 domains I have setup on rollernet for mail redirection. The error sending mail servers get is (450 server configuration error). This is affecting my 3 domains, and probably others using the rollernet network. I've rebooted my servers and noticed that occasionally a mail message slips through. Can someone please check mail.rollernet.us and mail2.rollernet.us for problems. I tried using telnet to send some tests but also got (bad address syntax) messages when entering the from line.
Thanks
450 server configuration errors
Moderator: Moderators
-
- Site Admin
- Posts: 598
- Joined: Wed Nov 17, 2004 10:05 pm
- Location: Nevada
- Contact:
Do you mean our servers are sending out "450 server configuration error" or your server is? If it's yours, and you're running Postfix with a policy filter, that means something is wrong with the policy filter. If it's from us, we had a connection problem with one of our databases behind our load balancer yesterday (August 23) around 5:12pm PDT (GMT -7); that problem was quickly corrected and we haven't noticed any further issues.
If you're manually sending SMTP commands to our servers, we require addresses to be in strict format; i.e. enclosed by < and >. Example:
MAIL FROM:<support@rollernet.us>
If you don't use that format, you'll get an error.
If you're manually sending SMTP commands to our servers, we require addresses to be in strict format; i.e. enclosed by < and >. Example:
MAIL FROM:<support@rollernet.us>
If you don't use that format, you'll get an error.
Technical Support support@rollernet.us
Roller Network LLC
Roller Network LLC
-
- Posts: 4
- Joined: Thu Aug 24, 2006 11:55 am
info
I am getting this error from your servers. I have an Exchange mail system specifically I can see this from, plus mail sent from outside sources like yahoo or msn, also don't get delivered and end up trickling through over the course of serveral hours. I see messages I send from Exchange at my work, in the queue delayed with reason code (450 server configuration error). I don't have any other MX records on my domains but rollernets, so I think its something wtih your mail servers. I have my filter policy on my rollernet account set to default allow, but was still getting it before I changed it to that, as I was using default deny with a valud user table.
-
- Site Admin
- Posts: 598
- Joined: Wed Nov 17, 2004 10:05 pm
- Location: Nevada
- Contact:
-
- Posts: 4
- Joined: Thu Aug 24, 2006 11:55 am
no
I just sent more tests and everything seems to be working ok now. I sent two tests from yahoo and they came through in seconds, and I just sent a test from the same Exchange mail system at work and it came right through. Whatever the problem was, appears to be fixed. I didn't do anything to my systems, so I still can't explain what was causing it. Now I have to wait for sending mail servers to re-queue mail that could not make it through before. I'll probably see mail come in tomorrow with a sent date of today.
-
- Site Admin
- Posts: 598
- Joined: Wed Nov 17, 2004 10:05 pm
- Location: Nevada
- Contact: