6to4 source address causing Secondary DNS to ignore notify

IPv6 specific questions and discussion.

Moderator: Moderators

6to4 source address causing Secondary DNS to ignore notify

Postby robnich » Sat Jul 31, 2010 1:24 pm

My server came by default with a 6to4 tunnel set up. Today I noticed this issue, but it's probably been around for a while, I assume since rollernet added ipv6 support?

My server notified the secondary DNS servers of a zone change, and got the ipv6 address for ns1.rollernet.us. It then connected using the 6to4 tunnel, which gave it a 2002: ipv6 address. Rollernet's server then ignored the notify because the 2002: address isn't a master.

It would seem to make sense for the secondary servers to see the 2002: address as equivalent to the corresponding ipv4 address, since this is only a mapping of the address.

I've solved the problem by disabling the 6to4 tunnel, and I'm working to get my HE 6tunnel addresses working. I used a hostname as the master server for my zones. If my master connects using ipv6 and the reverse DNS matches the hostname, will the secondary server still accept the notify?
robnich
 
Posts: 6
Joined: Fri Sep 07, 2007 2:08 pm

Re: 6to4 source address causing Secondary DNS to ignore noti

Postby Seth » Sat Jul 31, 2010 4:15 pm

The hostname is not used beyond doing an A record lookup before generating the config for BIND; it's impossible to define a master server by hostname. On the BIND side it's IP only, so your config was built with an IPv4 address only. A 6to4 address will work fine as long as it's listed.
Seth Mattinen, Roller Network LLC
Seth
Site Admin
 
Posts: 281
Joined: Sun Aug 30, 2009 10:44 pm
Location: Nevada


Return to IPv6 Help

Who is online

Users browsing this forum: No registered users and 1 guest

cron